Axiolab-A1

Technical Specifications:

Microscope stand "Axio Lab.A1" HAL 35, 5x H, mechanical stage R
– Z-drive with fine drive knob left and fine drive disk right, flat with scala
– nosepiece 5x brightfield, M27
– integrated 12V DC 50W power unit, stabilized 100…240V AC/ 50…60Hz/110VA
– transmitted-light illumination   with halogen reflector lamp 12V 35W,
– stage and condenser carrier
– mechanical stage 75×30 R   with hardcoat anodized surface,   210 x 145 mm stage plate,covered X-guide positioned at bottom, right drive 135 mm (extendable by   15 mm) with friction setting
– specimen holder for one-hand operation,
spring lever left
– country-specific power cable
Bulb 12V 35W Contrast-enhancing blue filter, d=32×2 mm Halogen Reflector GU5.3
Binocular phototube 30°/20 (50:50), reversed image
Dust cover
Objective "A-Plan" 5x/0.12 M27
Objective "A-Plan" 10x/0.25 M27
Objective "A-Plan" 40x/0.65 M27
Condenser 0.9/ 1.25 H for "Axio Lab.A1"
Eyepiece E- Eyepiece eyecup
PL 10x/20 Br.foc.
Camera Adapter 60N-C 2/3" 0.5x

Digital Microscopy Camera
Model: Axiocam ERc 5s
Technical Specifications:
Digital Microscopy Camera AxioCam ERc 5s  with AxioVision driver, configuration tool and connection cable USB 2.0.
Sensor:   Micron MT9P031, 5 Megapixels, color, CMOS
Basic resolution: 2560 (H) x 1920 (V) = 5.0 Megapixels
Pixel size: 2.2 µm x 2.2 µm
Sensor size: 5.7 mm x 4.28 mm equivalent 1/2.5" (diagonal 7.1 mm)
Live frame rate (depending on hardware and software configuration):
H     x      V       Frame Rate
800   x    600         max. 13
Digitization:   3 x 8 bit/pixel
Integration time:   10 µs up to 2 s
Interfaces:   1x SD card slot, 1x mini USB 2.0, 1x DVI-D (HDMI)
Spectral range:   Approx. 400 nm-700 nm, IR-Filter
Read-out mode:   Progressive
Optical interface:   C-mount