Powder Testing

You are here:

Tap Density Tester Bulk Density Tester Powder Flow Analyzer

Tap Density Tester

Laboratory Equipments, Medical Equipments, Analytical Equipments, Diagnostic Reagents, Household Products,

Tap Density Tester

The PT-TD200 instrument measures the tapping or bulk density or apparent volume of powders or granules. PT DT200 is fully USP <616, Method 1-2> , EP <2.9.34-3, Method 1-2> and DIN 53194 compliant.

Features:

Determine bulk density of powders to improve product quality during development and to secure consistency in quality assurance
Supports testing in compliance to both USP <616, Method 1 and 2> and EP <2.9.15> in the same instrument by using two cylinder positions
Automated detection of cylinder position and adjustment of correct tapping speed and height
Noise protection hood available as an option

Bulk Density Tester – PT SV100

Features:

Fully ISO 3923-2 (metallic powders): determination of apparent density, EP <2.9.34.1> and USP <616, Method II> compliant
Applicable to powders including metal powders, compounds, pigments
Instrument comes ready to use, only an analytical balance is needed in addition

Powder Flow Analyzer PTG-S4

The automated PTG-S4 powder testing system is used to measure the flow behaviour of granules and powders in compliance with the current EP <2.9.36/17> and USP <1174> pharmacopoeia as well as with the international ISO 4324 standards.

Features:

Measure the flow behavior of powders and granules to reduce process costs and maintain quality and consistency of the final product
Integrated clear view dust protection dust protection hood