Muffle Furnace

Model: MF 110
Features:

  • Five different models (6.3, 5, 10 Litters) for    1,100°C; 1,200°C; 1,300°C
  • Temperature range : 300° C to 1100°C
  • Continuous operating temperature : 1050°C
  • Time to maximum temperature : 55 minutes
  • Interior chamber : Fiber board and refractory brick
  • PID microprocessor control system with dual display
  • Open wire heated system
  • Double envelope construction
  • Counter balanced vertical opening door

Learn more

Thermolyne™ Small Benchtop 1100°C Muffle Furnaces

Fast heatup and excellent energy efficiency - ideal for ashing most types of organic and inorganic samples, heat treating small steel parts, performing ignition tests, conducting gravimetric analysis and for the determination of volatile and suspended solids

Features:

  • Temp. range: 100°C to 1100°C
  • Capacity: 1.3 / 2.1 L
  • Digital single setpoint temperature control
  • Single display shows actual temperature or setpoint
  • Ceramic fiber insulation permits faster heatup, reducing energy consumption
  • Embedded heating element on top and both sides improves temperature uniformity
  • Drop-down door doubles as a shelf for loading and unloading
  • Door safety switch stops power to heating elements when door is opened
  • Thermocouple break protection cuts power to heating elements, preventing failure runaway condition

Learn more

Thermolyne™ Premium Large 1200°C Muffle Furnaces

Conduct industrial applications including ashing organic and inorganic samples and conducting gravimetric analysis.

Features:

  • Temp. range: 100°C to 1200°C
  • Capacity: 14 L
  • Four heating elements are located on the chamber top, bottom and sides for enhanced temperature uniformity
  • Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit
  • Door safety switch stops power to heating elements when door opens
  • Thermocouple break protection cuts power to the heating elements, preventing a thermocouple failure runaway condition
  • Furnaces with B1, C1, and D1 control also use a mechanical over-temperature protection relay
Choice of Temperature Controllers
  • A1: Digital single setpoint control; single display shows actual temperature or setpoint
  • B1: Digital single setpoint control with single ramp to setpoint and a dwell; single display shows actual temperature or setpoint
  • C1: Digital programmable control with one stored program of eight segments
  • D1: Digital programmable control with four stored programs, 16 segments per program and Controller includes RS-232 communications

Learn more

Thermolyne™ Largest Tabletop 1100°C Muffle Furnaces

Designed for safe operation, ideal for annealing glass, determinations of volatiles, catalyst research and ashing organic and inorganic samples. Triple your usable working area with two supplied accessory refractory shelves

Features:

  • Temp. range: 100°C to 1093°C
  • Capacity: 45 L
  • Advanced LED digital-set/digital-display temperature controller is microprocessor-controlled
  • LED display simultaneously shows both setpoint and actual furnace temperatures
  • User-selectable overtemperature protection
  • Open thermocouple protection
  • Heating elements are on chamber top, bottom and sides for enhanced temperature uniformity
  • Built-in vent port removes undesirable contaminants and moisture to extend the life of the element and unit
  • Critical electronic components and heating elements are protected by a 35A circuit breaker
  • Door safety switch stops power to the heating elements when door opens

Choice of Temperature Controllers
  • B1: Digital single setpoint control with a single ramp to setpoint and dwell; single display shows actual temperature or setpoint
  • C1: Digital programmable control with one stored program of 8 segments
  • D1: Digital programmable control with 4 stored programs, 16 segments per programl, and RS-232 communications interface

Learn more

Lindberg/Blue M™ Multipurpose 1500°C Muffle Furnaces

Double-wall construction with Moldatherm™ insulation for rapid heatup and cooldown, energy efficiency and cooler exterior surface temperatures.

Features:

  • Maximum Temp.: 1500°C
  • Capacity: 6/25 L
  • Adjustable high-limit over-temperature protection
  • Microprocessor-based PID control
  • Choice of two controllers: single program with multiple segments for ramp (up and down) and dwell (timed hold) temperature control or multiple program with up to 300 segments
  • Optional adjustable digital over-temperature control (OTC) protects furnace and load in the event of primary control circuit failure
  • Simultaneous LED display of actual and setpoint temperatures in either °C or °F
  • Silicon carbide heating elements for long-life, safety and reliable service with maximum energy savings
  • Safety door switch interrupts power to heating elements when door is opened; protects elements and minimizes exposure to operator
  • Moldatherm™ hearthplate supports load and protects interior from spillage and mishandling
  • Type “R” thermocouple is integrated into chamber backwall
  • 6L models with vertical lift door, 25L models with side swing door

Learn more

Lindberg/Blue M™ 1700°C Box Muffle Furnaces

Designed for efficient, high-temperature use with minimal maintenance, these furnaces feature a unique door and control sophistication ranging from solid-state, single setpoint to more versatile microprocessor-based systems with programming and communications options.

Features:

  • Maximum Temp.: 1700°C
  • Capacity: 17/25.5 L
  • Choice of single setpoint or programmable control
  • Side swing door provides full and easy access to chamber, protects user from heat surge
  • Atmosphere port, 0.375in. diameter, for fresh air or inert gas inlet (located at back wall, bottom)
  • Solid-state power module with ammeter, circuit breaker, transformer and front panel indicator lights for “Ready Element” and “Main Power Applied”
  • Safety power disconnect switch cuts power to heating elements when door is opened
  • Overrides main controller and shuts off power to furnace if high limit is reache
  • Moldatherm™ high-temperature ceramic fiber insulation with advanced graded design for fast heat-up and resistance to thermal shock
  • Moldatherm™ hearthplate supports load and protects chamber from spills or mishandling
  • High-volume cooling fans move air between inner and outer chamber to reduce exterior shell temperatures and improve energy efficiency and operator safety
  • Long-life type “B” thermocouples with 10ft. compensated lead wire and polarized plug for

Smart Heating Elements
  • Molybdenum disilicide elements with unique right-angle bend
  • Fast heat-up and recovery with excellent uniformity and energy efficiency
  • Increased resistance to thermal shock, ideal for rapid cycling over extended periods

Learn more